Zema Automation And Controls Private Limited

• Voltage range for power supply: 100–240VAC (-15%–10%), 50/60Hz ±5%.
• Fuse Capacity: 250 VAC/ 2 A.
• The quantity of inputs and Type 40 refers to relay counters and Type 40 is the digital number of outputs.Four 200 kHz input axes countersfour output axes at 200 kHz.
• The program's 16K steps capability.
• The durability of spike voltage is 1500 VAC for primary-secondary, 1500.
• VAC for primary-PE, and 500 VAC for secondary-PE.
• Insulation Impedance > 5 MΩ (500VDC from every I/O point to ground).
• Electrical Safety Directive: 8 kV Air Discharge.
• EFT: 2 kV Power Line.
• Analog & Communication I/O: Earth Digital I/O: 1 kVThe grounding wire's diameter must be less than the power supply cable's.
• (If numerous PLCs are being used simultaneously, kindly ensure that each PLC is correctly grounded.).
• Storage and/or Function Storage Temperature: -25°C to 70°C .

DVP60ES200R DELTA SERIES ES2 series is a small PLC for basic sequential control. It is economical, highly efficient and functional.

Specifications

*MPU points: 16 / 20 / 24 / 32 / 40 / 60
*Program capacity: 16k steps
*Built-in with 3 COM ports: 1 RS-232 port and 2 RS-485 ports, all are able to operate independently (Master/Slave)
*Max. I/O points: 256 input points + 16 output points, or 256 output points + 16 input points
*DVP-EX2 MPU is built in with 12-bit 4AD/2DA and offers analog/temperature modules of 14-bit resolution.
*Built-in with 8 high-speed input points (2 points for 100kHz, 6 points for 10kHz) and supports U/D, U/D Dir, A/B counting modes
*New motion control instructions: Close loop control, alignment mark, shield, immediate variable speed, S-Curve acceleration/deceleration
*Application in emerging industry: Exclusive instructions and function blocks designed for PV solar tracker
*Handy instructions for frequency inverter: For controlling the forward running, reverse running, RUN and STOP of Delta's AC motor drives
*Password protection: Password for subroutine, user ID, restriction on trial times
*Highly efficient instruction efficient instruction execution

1. MPU points: 14 (8DI + 6DO)
2. Max. I/O points: 494 (14 + 480)
3. Program capacity: 8k steps
4. COM port: Built-in RS-232 & RS-485 ports, compatible with Modbus ASCII/RTU protocol. Can be master or slave.
5. High-Speed Pulse Output：Supports 4 points (Y0 ~ Y3) of independent high-speed (max. 10kHz) pulse output
6. Supports PID Auto-tuning：DVP-SS2 saves parameters automatically after the PID auto temperature tuning is completed.
7. Built-in High-Speed Counters

1. High-speed pulse output: 4 sets of 200kHz pulse output
2. Supports max. 4 hardware 200kHz high-speed counters
3. Increases many motion control instructions to meet the applications that require high-speed and high-precision positioning
4. Offers linear / arc interpolation motion control
5. Provides up to 16 external interrupt pointers

1. Auto backup function to prevent losing programs and data even when the battery runs out
2. Second copy function provides a backup for extra insurance in the event that one set of programs and data are damaged
3. Up to 4-level password protection protects your source programs and intellectual property

1. Add new ETHRW instruction for Ethernet communication

• Family Series: Delta Products DVP-ES2 Series Publishes Supply Voltage.
• 100-240 VAC Programmable Logic Controllers.
• Voltage of Nominal Supply: 120 VAC, 208 VAC, 240 VAC.
• Quantity of Inputs & Transistor Type 16 Number of Outputs & Digital Type 16.
• Expandable: 256 I/O Points maximum.
• Type of Display: None; Communications: (3) RS-485/RS-232.
• I/O Expansion Capable: Yes.
• Maximum Expansions: 256.

1. MPU points: 12 (8DI + 4DO)
2. Max. I/O points: 492 (12 + 480)
3. Program capacity: 16k steps
4. COM port: Built-in RS-232 & 2 RS-485 ports, compatible with Modbus ASCII/RTU protocol.
5. Can be master or slave.
6. High-Speed Pulse Output: Supports 2 points (Y0, Y2) of 100kHz and 2 points (Y1, Y3) of 10kHz independent high-speed pulse output.
7. Extendable to Max. 8 Modules: DVP-SA2 is extendable to analog I/O, temperature measurement, input DIP switch, PROFIBUS/DeviceNet communication modules and single-axis motion control functions.
8. Built-in High-Speed Counters

• Program capacity: 16k steps.
• MPU points: 16 / 20 / 24 / 32 / 40 / 60.
• Included with three RS-232 and two RS-485 COM ports that can each function independently as a slave or master. 
• Maximum input/output points (I/O): 256 input + 16 output, or 256 output + 16 input.
• The DVP-EX2 MPU has built-in 12-bit 4AD/2DA and 14-bit resolution analog/temperature modules.
• 8 high-speed input points are built-in (2 for 100 kHz, 6 for 10 kHz), and U/D, U/D Dir, and A/B counting modes are supported Close loop control, alignment marks, shields, instantaneous variable speed, and S-curve acceleration/deceleration are the new motion control commands.

The Mitsubishi FX3U series logic module has 24 inputs and 24 transistor outputs. This DIN rail mount logic module has a screw termination method. This logic module has a supply voltage that ranges between 100VAC and 240VAC and the output current rating of 800mA.
Mitsubishi FX3U
FX3U CPU's are compatible with existing FX2N expansion modules as well as the new FX3U ADP expansion modules and may be used as a replacement for FX2N PLC's.

CPU base units
Extremely fast processing time
Expanded input/output area for networks
Exchangeable interface & I/O adapter boards
Fully compatible with the PROFIBUS/DP network and Ethernet
Displays the input and output states via LEDs
Integrated real-time clock
Versions with up to 256 inputs and outputs
Operating temperature ranges between 0°C and 50°C
Password access protection

Industrial sites
Complex designs

CE
UL approved

DIO 4352
AIO 544
RIO 1254400/3920 ANALOG CHANNELS
Max. I/O points - 494 (14 + 480)Program capacity - 16k stepsCOM port - Built-in RS-232, RS-485 & USB ports, compatible with ASCII/RTU protocol. Can be master or slave.High-Speed Pulse Output - Supports 2 points (Y0, Y2) of 100kHz and 2 points (Y1, Y3) of 10kHz independent high-speed pulse output.Built-in High-Speed CountersBuilt-in Analog I/O
Application:
Used for PID temperature/humidity control, 2-axis AC motor drive constant speed control, temperature control using a analog signal monitoring of a whole factory. (PLC EASY LINK)

Applications

HVAC, molding injection machine, big storage management, packaging machine, precise textile machine, logistic system

• Four sets of 200 kHz pulse output (DVP40/48/64/80EH00T3) provide high-speed pulse output.
• maximum of four hardware supported High-speed counters at 200 kHz.
• expands the number of motion control instructions to accommodate applications like labeling, packaging, and printing equipment that demand high-speed, high-precision positioning control.
• provides motion control via linear and arc interpolation.
• up to 16 external interrupt points are available.Floating point operations are supported by the twin CPUs (CPU + ASIC).
• The maximum speed at which basic instructions can be executed is 0.24 microseconds.

• Programmability: PLCs may be used to operate a variety of machines and processes by programming them to carry out specific logic sequences.
• Sensors, switches, motors, and other devices are just a few examples of the many inputs and outputs that PLCs are able to monitor and manage.
• Communication: PLCs may share data and control signals with other systems and devices, including computers, HMIs, and other PLCs.
• Reliability: With redundant parts and fault-tolerant design elements, PLCs are built for high availability and reliability.
• Flexibility: PLCs are a flexible and adaptable solution for industrial automation because they can be reprogrammed and reconfigured to react to changes in the gear or process being controlled.
• All things considered, PLCs are a crucial part of contemporary industrial automation, offering a dependable and adaptable solution.

• MPU points: 16 / 20 / 24 / 32 / 40 / 60
• Program capacity: 16k steps
• Built-in with 3 COM ports: 1 RS-232 port and 2 RS-485 ports, all are able to operate independently (Master/Slave)
• Max. I/O points: 256 input points + 16 output points, or 256 output points + 16 input points
• DVP-EX2 MPU is built in with 12-bit 4AD/2DA and offers analog/temperature modules of 14-bit resolution
• Built-in with 8 high-speed input points (2 points for 100kHz, 6 points for 10kHz) and supports U/D, U/D Dir, A/B counting modes
• New motion control instructions: Close loop control, alignment mark, shield, immediate variable speed, S-Curve acceleration/deceleration
• Application in emerging industry: Exclusive instructions and function blocks designed for PV solar tracker
• Handy instructions for frequency inverter: For controlling the forward running, reverse running, RUN and STOP of Delta's AC motor drives
• Password protection: Password for subroutine, user ID, restriction on trial times
• Highly efficient instruction efficient instruction execution

1. High-speed pulse output: 4 sets of 200kHz pulse output (DVP40/48/64/80EH00T3)
2. Supports max. 4 hardware 200kHz high-speed counters
3. Increases many motion control instructions to meet the applications that require high-speed and high-precision
4. positioning control such as labeling machines, packaging machines and printing machines
5. Offers linear / arc interpolation motion control
6. Provides up to 16 external interrupt pointers

1. Auto backup function to prevent losing programs and data even when the battery runs out
2. Second copy function provides a backup for extra insurance in the event that one set of programs and data are damaged
3. Up to 4-level password protection protects your source programs and intellectual property

1. CPU + ASIC dual processors support floating point operations.
2. The max. execution speed of basic instructions is able to reach 0.24μs.

1. The multiple selections of extension modules and function cards provide analog I/O, temperature measurement, additional single-axis motion control, high-speed counting, 3rd serial communication port and Ethernet communication card are available.

1. The brand-new extension modules greatly shorten the data transmission time among the PLC and its extension modules as well as enhance the efficiency of the PLC program.

We are offering a wide range of Mitsubishi PLC.

Features:
When used for large systems with A4UCPU, 4,096 I/O points and program memory capacity of 120k steps are supported.Systems of an even higher processing capacity can be built using A3A, A3U or A4UCPU instead.Systems can easily be expanded to a larger scale by utilizing the network, since A2U, A3U, A4UCPU are compatible with the MELSECECNET/10.

• PLC with an inbuilt HMI
• Annunciator and PB Lamps
• Customizable MIMIC
• I/O Capacity- 48
• Serial, Ethernet and MODBUS Connectivity
• Analog I0

• Offers 10-point, 16-point, 24-point, and 48-point controllers
• Includes 100KHz speed high-speed counter (HSC) on 24V DC models
• Supports as many as five Micro800™ plug-in Modules
• Provides embedded motion capabilities by supporting as many as three axes with Pulse Train Outputs (PTO)
• Provides embedded communications via USB programming port and non-isolated serial port (for RS-232 and RS-485 communications)
• Operates in -20…65 °C (-4…149 °F) temperatures
• Supports microSD™ card for program transfer, datalog, and recipe management through plug-in module